Maintenance and Care When the projector detects an abnormal condition, it will be automatically shut down to protect the inside components of the projector. In this case, the LAMP indicator light will come on and other indicators will begin to blink. To confirm whether or not there is a problem, unplug the AC power cord then,.. read more →
Please contact an Authorized Eiki service center in your area for help. You can view a list of Authorized Eiki service centers at https://www.eiki.com/authorized-service-centers/. read more →
Please contact an Authorized Eiki service center in your area for help. You can view a list of Authorized Eiki service centers at https://www.eiki.com/authorized-service-centers/. read more →
Please contact an Authorized Eiki service center in your area for assistance. You can view a list of Authorized Eiki service centers at https://www.eiki.com/authorized-service-centers/. read more →
A projector's display is limited by the panel size (number of pixels), if a projector's panel size is 1280 x 800 pixels and the source (ie. laptop) has a resolution greater than 1280 x 800 the difference is made up with black bars on the top, bottom, and sides read more →
There is no way to know why a projector is shaking without having it checked by a qualified technician, but possible causes are: a fan may be malfunctioning which can cause this, or possibly a color wheel (DLP projector only) may be failing and this can also cause a shake. read more →
There is no way to know why a projector is shaking without having it checked by a qualified technician, but possible causes are: a fan may be malfunctioning which can cause this, or possibly a color wheel (DLP projector only) may be failing and this can also cause a shake. read more →
Projectors have built in status indicator LEDs that are useful when troubleshooting. When the LEDs are flashing, they indicate that there is an abnormal condition that needs to be corrected. Consult the "Indicators and Projector Condition" section in the owner's manual appendix for your projector to interpret the meaning of the LEDs. You can download.. read more →
Caution!: Never connect or disconnect cables while your projector or devices are powered on. Cables can carry a low DC voltage and could cause a short or power surge which could damage electronic components. 1. The easiest way to re-negotiate the input signal handshake is to power cycle your devices. Power all devices off. Turn.. read more →
Symptoms The projector seems to be going through lamps much quicker than the original lamp. I just replaced my lamp. I purchased my lamp on line. Cause This is a common problem! Only Eiki dealers sell factory lamps for Eiki projectors! People buy 3rd party lamps because they can cost much less the factory lamps... read more →